Front page › Forums › iPhone i Sverige › Allt om iPhone › Upplåsning och jailbreak › Upplåsning för iPhone 3G* på nyårsafton
-
AuthorPosts
-
@andreas91 20739 wrote:
Precis, jag har redan laddat ner QuickPwn 2.2 men vågar inte göra något, visst det kittlar i fingrarna. Men kan inte riskera en obrukbar iPhone… :laugh:
Helt rätt, vänta och se. Jag är dock optimistisk, tror att detta kommer att gå alldeles utmärkt!
@andreas91 20739 wrote:
Precis, jag har redan laddat ner QuickPwn 2.2 men vågar inte göra något, visst det kittlar i fingrarna. Men kan inte riskera en obrukbar iPhone… :laugh:
Helt rätt, vänta och se. Jag är dock optimistisk, tror att detta kommer att gå alldeles utmärkt!
Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog
BASICS
* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.DETAILS
* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.RANDOM
* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”
Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone
Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog
BASICS
* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.DETAILS
* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.RANDOM
* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”
Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone
Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog
BASICS
* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.DETAILS
* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.RANDOM
* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”
Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone
Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog
BASICS
* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.DETAILS
* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.RANDOM
* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”
Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone
Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog
BASICS
* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.DETAILS
* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.RANDOM
* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”
Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone
Hoppas det fungerar med nyaste basbandet nu o att det bara inte e nå shit ….
För jag råkade ju uppdatera till 2.2 direkt vid release 😉Hoppas det fungerar med nyaste basbandet nu o att det bara inte e nå shit ….
För jag råkade ju uppdatera till 2.2 direkt vid release 😉Hoppas det fungerar med nyaste basbandet nu o att det bara inte e nå shit ….
För jag råkade ju uppdatera till 2.2 direkt vid release 😉Hoppas det fungerar med nyaste basbandet nu o att det bara inte e nå shit ….
För jag råkade ju uppdatera till 2.2 direkt vid release 😉Hoppas det fungerar med nyaste basbandet nu o att det bara inte e nå shit ….
För jag råkade ju uppdatera till 2.2 direkt vid release 😉Nu får dom släppa yellowsn0w! Börjar bli drygt att vänta…
Nu får dom släppa yellowsn0w! Börjar bli drygt att vänta…
Nu får dom släppa yellowsn0w! Börjar bli drygt att vänta…
Nu får dom släppa yellowsn0w! Börjar bli drygt att vänta…
Nu får dom släppa yellowsn0w! Börjar bli drygt att vänta…
@andreas91 20746 wrote:
We are watching you Jody…we won’t be so forgiving this
HA HA HA HA HA ! Snacka om att bli uthängd inför hela iphone communityn.
@andreas91 20746 wrote:
We are watching you Jody…we won’t be so forgiving this
HA HA HA HA HA ! Snacka om att bli uthängd inför hela iphone communityn.
@andreas91 20746 wrote:
We are watching you Jody…we won’t be so forgiving this
HA HA HA HA HA ! Snacka om att bli uthängd inför hela iphone communityn.
@andreas91 20746 wrote:
We are watching you Jody…we won’t be so forgiving this
HA HA HA HA HA ! Snacka om att bli uthängd inför hela iphone communityn.
@andreas91 20746 wrote:
We are watching you Jody…we won’t be so forgiving this
HA HA HA HA HA ! Snacka om att bli uthängd inför hela iphone communityn.
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
@amoorah 20756 wrote:
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
Precis!
Har precis installerat, men det verkar inte fungera… 🙁 Besvikelsen är total..
Jag kör på Tele2 för de som undrar.
@amoorah 20756 wrote:
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
Precis!
Har precis installerat, men det verkar inte fungera… 🙁 Besvikelsen är total..
Jag kör på Tele2 för de som undrar.
@amoorah 20756 wrote:
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
Precis!
Har precis installerat, men det verkar inte fungera… 🙁 Besvikelsen är total..
Jag kör på Tele2 för de som undrar.
@amoorah 20756 wrote:
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
Precis!
Har precis installerat, men det verkar inte fungera… 🙁 Besvikelsen är total..
Jag kör på Tele2 för de som undrar.
@amoorah 20756 wrote:
okej kan nån beskriva hur man gör jag har 2.1 ska jag uppgradera som vanligt med itunes till 2.2 sen jailbreaka den igen med quickpwn 2.2 sen låsa upp?
Precis!
Har precis installerat, men det verkar inte fungera… 🙁 Besvikelsen är total..
Jag kör på Tele2 för de som undrar.
Simba, har du följt deras instruktioner?
Simba, har du följt deras instruktioner?
-
AuthorPosts
- You must be logged in to reply to this topic.