[Andreas91Member January 1, 2009 at 16:07 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46288

If you are in the U.S. and are trying this with T-Mobile, you must turn off the 3G switch in Settings. Also if you are good with the command line, you can make it much easier by adding the line -q right after the /usr/bin/yellowsn0w line in /System/Library/LaunchDaemons/org.iphone-dev.yellowsn0w.plist (that’s and advanced tip, hopefully someone will make a boosprefs type of tool for it)

FINALLY GOT IT WORKING. VODAFONE UK!!
I had to do numerous reboots. But after I rebooted I left it on the homescreen for a bout a minute and then reinserted. It then went SEARCHING before I got the network name and bars

TURN AIRPLANE MODE TO ON THEN OFF AGAIN.. THAT WORKED FOR ME.

Men som sagt är det många som har rapporterat att det inte fungerar för dem. Men som amko sa. Testa ta ut simkortet i några minuter och sedan testa och sätta in det igen.

[Andreas91Member January 1, 2009 at 16:07 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48603

If you are in the U.S. and are trying this with T-Mobile, you must turn off the 3G switch in Settings. Also if you are good with the command line, you can make it much easier by adding the line -q right after the /usr/bin/yellowsn0w line in /System/Library/LaunchDaemons/org.iphone-dev.yellowsn0w.plist (that’s and advanced tip, hopefully someone will make a boosprefs type of tool for it)

FINALLY GOT IT WORKING. VODAFONE UK!!
I had to do numerous reboots. But after I rebooted I left it on the homescreen for a bout a minute and then reinserted. It then went SEARCHING before I got the network name and bars

TURN AIRPLANE MODE TO ON THEN OFF AGAIN.. THAT WORKED FOR ME.

Men som sagt är det många som har rapporterat att det inte fungerar för dem. Men som amko sa. Testa ta ut simkortet i några minuter och sedan testa och sätta in det igen.

[Andreas91Member January 1, 2009 at 15:57 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50180

Fan va snabba ni är! Redan Två st som postat Dev-Teams blogg-updatering

[Andreas91Member January 1, 2009 at 15:57 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52319

Fan va snabba ni är! Redan Två st som postat Dev-Teams blogg-updatering

[Andreas91Member January 1, 2009 at 15:57 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31076

Fan va snabba ni är! Redan Två st som postat Dev-Teams blogg-updatering

[Andreas91Member January 1, 2009 at 15:57 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46280

Fan va snabba ni är! Redan Två st som postat Dev-Teams blogg-updatering

[Andreas91Member January 1, 2009 at 15:57 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48595

Fan va snabba ni är! Redan Två st som postat Dev-Teams blogg-updatering

[Andreas91Member January 1, 2009 at 15:41 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52308

Någon mer som har testat? :rolleyes:

[Andreas91Member January 1, 2009 at 15:41 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31065

Någon mer som har testat? :rolleyes:

[Andreas91Member January 1, 2009 at 15:41 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46269

Någon mer som har testat? :rolleyes:

[Andreas91Member January 1, 2009 at 15:41 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48584

Någon mer som har testat? :rolleyes:

[Andreas91Member January 1, 2009 at 15:41 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50169

Någon mer som har testat? :rolleyes:

[Andreas91Member January 1, 2009 at 14:08 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52295

Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog

BASICS

* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.

DETAILS

* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.

RANDOM

* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!

The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”

Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone

[Andreas91Member January 1, 2009 at 14:08 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31052

Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog

BASICS

* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.

DETAILS

* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.

RANDOM

* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!

The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”

Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone

[Andreas91Member January 1, 2009 at 14:08 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46256

Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog

BASICS

* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.

DETAILS

* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.

RANDOM

* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!

The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”

Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone

[Andreas91Member January 1, 2009 at 14:08 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48571

Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog

BASICS

* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.

DETAILS

* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.

RANDOM

* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!

The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”

Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone

[Andreas91Member January 1, 2009 at 14:08 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50156

Här står det hur man skall gå till väga när man ska låsa upp den. Citatet är taget ur Dev-Team:s blogg på följande sida Dev-Team Blog

BASICS

* The unlock about to be released is only for the iPhone 3G. The iPhone 2G is already unlockable via BootNeuter (as installed by PwnageTool and QuickPwn).
* This unlock works exclusively with baseband 02.28.00. This baseband is provided by the latest firmware update (2.2) from Apple. You’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc. There are plenty of tutorials about this on iclarified, bigboss, and other established tutorial sites. Because it works on 02.28.00, it is available to everyone on the planet. This means we don’t need to unnecessarily expose holes in earlier basebands, which is an important concern.
* The application is a small daemon that is launched on boot. It injects the payload at boot and also whenever there is a baseband reset. You won’t notice anything about it other than that your third-party sim now works. It’s a small program and unobtrusive. There is no GUI (this is by design).
* You can add the application using the sources outlined below (coming soon). There are Cydia and Installer sources available, so use whichever you are comfortable using.
* yellowsn0w is completely removable through Cydia, the command line, and iTunes.

DETAILS

* There is a known issue with SIM cards that have STK (SIM Toolkit) application menus. These menus are usually items such as “top up” “get credit” etc. These menu items confuse the application sometimes. Removing and reinserting the SIM once after reboot (give it about 10 secs after you see the slide to unlock widget) fixes this issue. We’re working on a better fix.
* For those of you using SIM cards without STK menus, the application has some optional arguments that will make the unlock much faster for you. So either experiment on your own (use “yellowsn0w -h” for usage) or wait for a customization writeup.
* After you install yellowsn0w via Cydia, you should return to the Cydia main menu then reboot your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, then wait 10 or 15 secs more. If you don’t see your carrier name pop up, then remove your SIM, reinsert it, and wait 10 secs more. This is the step we’ll be working on eliminating next.

RANDOM

* The application is version 0.9. This is considered beta software, and you use it at your own risk (you know the score). We guarantee that it’s not perfect and will require tweaking. Welcome to the cutting edge. (It’s a good thing these are just temporary RAM patches!)
* The application is released on a non-commerical basis. Please do not accept pirates and scummy ripoffs of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies. We are watching you Jody…we won’t be so forgiving this time.
* Direct linking to the repository URLs is prohibited, please only link to this post. We will be checking referers.
* Happy 2009 and enjoy!

The iPhone 3G is used all over the world with all sorts of SIM cards, and we almost certainly will see untested and unexpected situations. If the soft unlock doesn’t work for you on day 1 (literally day 1, of 2009!) then please don’t panic or be impatient. This is new territory for everyone, so enjoy the ride as much as you can :)”

Uppmanar er dock att inte uppdatera till 2.2, då vi ännu inte har fått en bekräftelse på att det fungerar problemfritt med Yellowsn0w och BaseBand 02.28.00. Så tills vidare rekomenderar jag er att avvakta tills vidare. Heldre vänta lite än att få en obrukbar iPhone

[Andreas91Member January 1, 2009 at 12:39 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52288

@mothergoose 20738 wrote:

Samma här. Så som jag förstått det är det följande steg:
1. Uppdatera från 2.1 till 2.2
2. Använd Quickpwn (versionen för 2.2)
3. Enligt Dev-team: Installera (via Cydia) yellowsnow
4. Lek med din upplåsta telefon utan fejksim?

Precis, jag har redan laddat ner QuickPwn 2.2 men vågar inte göra något, visst det kittlar i fingrarna. Men kan inte riskera en obrukbar iPhone… :laugh:

[Andreas91Member January 1, 2009 at 12:39 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31045

@mothergoose 20738 wrote:

Samma här. Så som jag förstått det är det följande steg:
1. Uppdatera från 2.1 till 2.2
2. Använd Quickpwn (versionen för 2.2)
3. Enligt Dev-team: Installera (via Cydia) yellowsnow
4. Lek med din upplåsta telefon utan fejksim?

Precis, jag har redan laddat ner QuickPwn 2.2 men vågar inte göra något, visst det kittlar i fingrarna. Men kan inte riskera en obrukbar iPhone… :laugh:

[Andreas91Member January 1, 2009 at 12:39 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46249

@mothergoose 20738 wrote:

Samma här. Så som jag förstått det är det följande steg:
1. Uppdatera från 2.1 till 2.2
2. Använd Quickpwn (versionen för 2.2)
3. Enligt Dev-team: Installera (via Cydia) yellowsnow
4. Lek med din upplåsta telefon utan fejksim?

Precis, jag har redan laddat ner QuickPwn 2.2 men vågar inte göra något, visst det kittlar i fingrarna. Men kan inte riskera en obrukbar iPhone… :laugh:

[Andreas91Member January 1, 2009 at 12:39 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48564

@mothergoose 20738 wrote:

Samma här. Så som jag förstått det är det följande steg:
1. Uppdatera från 2.1 till 2.2
2. Använd Quickpwn (versionen för 2.2)
3. Enligt Dev-team: Installera (via Cydia) yellowsnow
4. Lek med din upplåsta telefon utan fejksim?

Precis, jag har redan laddat ner QuickPwn 2.2 men vågar inte göra något, visst det kittlar i fingrarna. Men kan inte riskera en obrukbar iPhone… :laugh:

[Andreas91Member January 1, 2009 at 12:39 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50149

@mothergoose 20738 wrote:

Samma här. Så som jag förstått det är det följande steg:
1. Uppdatera från 2.1 till 2.2
2. Använd Quickpwn (versionen för 2.2)
3. Enligt Dev-team: Installera (via Cydia) yellowsnow
4. Lek med din upplåsta telefon utan fejksim?

Precis, jag har redan laddat ner QuickPwn 2.2 men vågar inte göra något, visst det kittlar i fingrarna. Men kan inte riskera en obrukbar iPhone… :laugh:

[Andreas91Member January 1, 2009 at 12:23 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52286

Jag tror jag väntar att låsa upp den till kvällen, då vet jag garanterat om det fungerar problemfritt. En liten fråga till er som har Jailbreakat förr. Är det sant att man först uppdaterar den via iTunes och sen använder program som QuickPwn och PwnageTool. Eller hur brukar man göra.
Min iPhone var Jailbreakad när jag inhandlade den så jag har aldrig gjort det förr. 😮

[Andreas91Member January 1, 2009 at 12:23 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31043

Jag tror jag väntar att låsa upp den till kvällen, då vet jag garanterat om det fungerar problemfritt. En liten fråga till er som har Jailbreakat förr. Är det sant att man först uppdaterar den via iTunes och sen använder program som QuickPwn och PwnageTool. Eller hur brukar man göra.
Min iPhone var Jailbreakad när jag inhandlade den så jag har aldrig gjort det förr. 😮

[Andreas91Member January 1, 2009 at 12:23 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46247

Jag tror jag väntar att låsa upp den till kvällen, då vet jag garanterat om det fungerar problemfritt. En liten fråga till er som har Jailbreakat förr. Är det sant att man först uppdaterar den via iTunes och sen använder program som QuickPwn och PwnageTool. Eller hur brukar man göra.
Min iPhone var Jailbreakad när jag inhandlade den så jag har aldrig gjort det förr. 😮

[Andreas91Member January 1, 2009 at 12:23 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48562

Jag tror jag väntar att låsa upp den till kvällen, då vet jag garanterat om det fungerar problemfritt. En liten fråga till er som har Jailbreakat förr. Är det sant att man först uppdaterar den via iTunes och sen använder program som QuickPwn och PwnageTool. Eller hur brukar man göra.
Min iPhone var Jailbreakad när jag inhandlade den så jag har aldrig gjort det förr. 😮

[Andreas91Member January 1, 2009 at 12:23 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50147

Jag tror jag väntar att låsa upp den till kvällen, då vet jag garanterat om det fungerar problemfritt. En liten fråga till er som har Jailbreakat förr. Är det sant att man först uppdaterar den via iTunes och sen använder program som QuickPwn och PwnageTool. Eller hur brukar man göra.
Min iPhone var Jailbreakad när jag inhandlade den så jag har aldrig gjort det förr. 😮

[Andreas91Member January 1, 2009 at 12:17 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52282

Bra, en försökskanin, det gillar vi 😛

[Andreas91Member January 1, 2009 at 12:17 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31039

Bra, en försökskanin, det gillar vi 😛

[Andreas91Member January 1, 2009 at 12:17 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46243

Bra, en försökskanin, det gillar vi 😛

[Andreas91Member January 1, 2009 at 12:17 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48558

Bra, en försökskanin, det gillar vi 😛

[Andreas91Member January 1, 2009 at 12:17 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50143

Bra, en försökskanin, det gillar vi 😛

[Andreas91Member January 1, 2009 at 11:40 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52276

Riktigt nära nu.

“The unlock application (that we are about to release) works with baseband 02.28. This baseband update is provided by the latest firmware update from Apple, you’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc, there are plenty of tutorials about this.
* The application is a small daemon that is launched on boot and also whenever there is a baseband reset, you won’t know anything about it (apart from the use of the third-party SIM) it is small and unobtrusive, there is no GUI, this is by design.
* You can add the application using the sources outlined below (coming soon), there are Cydia and Installer sources available, use whichever you are comfortable using.
* The application is released on a non-commerical basis, do not accept pirates of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies.
* Happy 2009 and enjoy!”

Så jag antar att man först ska uppdatera via iTunes och sen jailbreaka den via QuickpWn.
Någon som kan länka en bra guide hur man jailbreakar den.

[Andreas91Member January 1, 2009 at 11:40 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31033

Riktigt nära nu.

“The unlock application (that we are about to release) works with baseband 02.28. This baseband update is provided by the latest firmware update from Apple, you’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc, there are plenty of tutorials about this.
* The application is a small daemon that is launched on boot and also whenever there is a baseband reset, you won’t know anything about it (apart from the use of the third-party SIM) it is small and unobtrusive, there is no GUI, this is by design.
* You can add the application using the sources outlined below (coming soon), there are Cydia and Installer sources available, use whichever you are comfortable using.
* The application is released on a non-commerical basis, do not accept pirates of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies.
* Happy 2009 and enjoy!”

Så jag antar att man först ska uppdatera via iTunes och sen jailbreaka den via QuickpWn.
Någon som kan länka en bra guide hur man jailbreakar den.

[Andreas91Member January 1, 2009 at 11:40 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46237

Riktigt nära nu.

“The unlock application (that we are about to release) works with baseband 02.28. This baseband update is provided by the latest firmware update from Apple, you’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc, there are plenty of tutorials about this.
* The application is a small daemon that is launched on boot and also whenever there is a baseband reset, you won’t know anything about it (apart from the use of the third-party SIM) it is small and unobtrusive, there is no GUI, this is by design.
* You can add the application using the sources outlined below (coming soon), there are Cydia and Installer sources available, use whichever you are comfortable using.
* The application is released on a non-commerical basis, do not accept pirates of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies.
* Happy 2009 and enjoy!”

Så jag antar att man först ska uppdatera via iTunes och sen jailbreaka den via QuickpWn.
Någon som kan länka en bra guide hur man jailbreakar den.

[Andreas91Member January 1, 2009 at 11:40 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48552

Riktigt nära nu.

“The unlock application (that we are about to release) works with baseband 02.28. This baseband update is provided by the latest firmware update from Apple, you’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc, there are plenty of tutorials about this.
* The application is a small daemon that is launched on boot and also whenever there is a baseband reset, you won’t know anything about it (apart from the use of the third-party SIM) it is small and unobtrusive, there is no GUI, this is by design.
* You can add the application using the sources outlined below (coming soon), there are Cydia and Installer sources available, use whichever you are comfortable using.
* The application is released on a non-commerical basis, do not accept pirates of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies.
* Happy 2009 and enjoy!”

Så jag antar att man först ska uppdatera via iTunes och sen jailbreaka den via QuickpWn.
Någon som kan länka en bra guide hur man jailbreakar den.

[Andreas91Member January 1, 2009 at 11:40 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50137

Riktigt nära nu.

“The unlock application (that we are about to release) works with baseband 02.28. This baseband update is provided by the latest firmware update from Apple, you’ll need to upgrade to this release using iTunes and then use QuickPwn to activate etc, there are plenty of tutorials about this.
* The application is a small daemon that is launched on boot and also whenever there is a baseband reset, you won’t know anything about it (apart from the use of the third-party SIM) it is small and unobtrusive, there is no GUI, this is by design.
* You can add the application using the sources outlined below (coming soon), there are Cydia and Installer sources available, use whichever you are comfortable using.
* The application is released on a non-commerical basis, do not accept pirates of this software. We license this software for single use and in a non-commerical environment (meaning you can’t charge for it). The techniques and methods used are not to be used by third party companies.
* Happy 2009 and enjoy!”

Så jag antar att man först ska uppdatera via iTunes och sen jailbreaka den via QuickpWn.
Någon som kan länka en bra guide hur man jailbreakar den.

[Andreas91Member January 1, 2009 at 10:44 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52273

@mothergoose 20723 wrote:

Jag vet faktiskt inte riktigt! Vore snällt om de kunde komma med tydliga instruktioner exakt kring hur man ska göra… Å andra sidan känner jag inte direkt att jag är i en position att ställa krav på dem med tanke på att de gör allt detta gratis och har lagt ner mycket tid på det…

“Update 3: Now to explain the above screenshot. The soft unlock has undergone many changes in the last two days. The most significant one: the soft unlock will now be only for baseband 02.28.00 (the most recent baseband). Yes we’ve been advising everyone to avoid updating their basebands, and in general that will always be the best policy. Not every baseband version is guaranteed to have a hole through which we can inject the unlock.

Update 4: (a) The yellowsn0w Cydia package will be available as soon as our devteam member in charge of the repo wakes up to fix a file permission error. (b) Once it’s out, those users with SIMs that have apps and other menus on them will need to do that extra step we’ve been talking about. They’ll need to pull and reinsert the SIM once after rebooting the phone to engage the unlock. Even though it’s needed only once per boot, it’s still a nuisance and we’ll be fixing that ASAP. (c) You’ll know if you fall into that “extra step” category if your carrier doesn’t show up within about 10 seconds of the slide to unlock screen. (d) Yes it really is for baseband 02.28.00. That means everyone can use it now! (e) Happy New Year!”

Det verkar som det i alla fall. Fan kan knappt bärga mig nu! Han får ju ta och vakna och fixa error:et så det släpps! :rolleyes:

[Andreas91Member January 1, 2009 at 10:44 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31030

@mothergoose 20723 wrote:

Jag vet faktiskt inte riktigt! Vore snällt om de kunde komma med tydliga instruktioner exakt kring hur man ska göra… Å andra sidan känner jag inte direkt att jag är i en position att ställa krav på dem med tanke på att de gör allt detta gratis och har lagt ner mycket tid på det…

“Update 3: Now to explain the above screenshot. The soft unlock has undergone many changes in the last two days. The most significant one: the soft unlock will now be only for baseband 02.28.00 (the most recent baseband). Yes we’ve been advising everyone to avoid updating their basebands, and in general that will always be the best policy. Not every baseband version is guaranteed to have a hole through which we can inject the unlock.

Update 4: (a) The yellowsn0w Cydia package will be available as soon as our devteam member in charge of the repo wakes up to fix a file permission error. (b) Once it’s out, those users with SIMs that have apps and other menus on them will need to do that extra step we’ve been talking about. They’ll need to pull and reinsert the SIM once after rebooting the phone to engage the unlock. Even though it’s needed only once per boot, it’s still a nuisance and we’ll be fixing that ASAP. (c) You’ll know if you fall into that “extra step” category if your carrier doesn’t show up within about 10 seconds of the slide to unlock screen. (d) Yes it really is for baseband 02.28.00. That means everyone can use it now! (e) Happy New Year!”

Det verkar som det i alla fall. Fan kan knappt bärga mig nu! Han får ju ta och vakna och fixa error:et så det släpps! :rolleyes:

[Andreas91Member January 1, 2009 at 10:44 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46234

@mothergoose 20723 wrote:

Jag vet faktiskt inte riktigt! Vore snällt om de kunde komma med tydliga instruktioner exakt kring hur man ska göra… Å andra sidan känner jag inte direkt att jag är i en position att ställa krav på dem med tanke på att de gör allt detta gratis och har lagt ner mycket tid på det…

“Update 3: Now to explain the above screenshot. The soft unlock has undergone many changes in the last two days. The most significant one: the soft unlock will now be only for baseband 02.28.00 (the most recent baseband). Yes we’ve been advising everyone to avoid updating their basebands, and in general that will always be the best policy. Not every baseband version is guaranteed to have a hole through which we can inject the unlock.

Update 4: (a) The yellowsn0w Cydia package will be available as soon as our devteam member in charge of the repo wakes up to fix a file permission error. (b) Once it’s out, those users with SIMs that have apps and other menus on them will need to do that extra step we’ve been talking about. They’ll need to pull and reinsert the SIM once after rebooting the phone to engage the unlock. Even though it’s needed only once per boot, it’s still a nuisance and we’ll be fixing that ASAP. (c) You’ll know if you fall into that “extra step” category if your carrier doesn’t show up within about 10 seconds of the slide to unlock screen. (d) Yes it really is for baseband 02.28.00. That means everyone can use it now! (e) Happy New Year!”

Det verkar som det i alla fall. Fan kan knappt bärga mig nu! Han får ju ta och vakna och fixa error:et så det släpps! :rolleyes:

[Andreas91Member January 1, 2009 at 10:44 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48549

@mothergoose 20723 wrote:

Jag vet faktiskt inte riktigt! Vore snällt om de kunde komma med tydliga instruktioner exakt kring hur man ska göra… Å andra sidan känner jag inte direkt att jag är i en position att ställa krav på dem med tanke på att de gör allt detta gratis och har lagt ner mycket tid på det…

“Update 3: Now to explain the above screenshot. The soft unlock has undergone many changes in the last two days. The most significant one: the soft unlock will now be only for baseband 02.28.00 (the most recent baseband). Yes we’ve been advising everyone to avoid updating their basebands, and in general that will always be the best policy. Not every baseband version is guaranteed to have a hole through which we can inject the unlock.

Update 4: (a) The yellowsn0w Cydia package will be available as soon as our devteam member in charge of the repo wakes up to fix a file permission error. (b) Once it’s out, those users with SIMs that have apps and other menus on them will need to do that extra step we’ve been talking about. They’ll need to pull and reinsert the SIM once after rebooting the phone to engage the unlock. Even though it’s needed only once per boot, it’s still a nuisance and we’ll be fixing that ASAP. (c) You’ll know if you fall into that “extra step” category if your carrier doesn’t show up within about 10 seconds of the slide to unlock screen. (d) Yes it really is for baseband 02.28.00. That means everyone can use it now! (e) Happy New Year!”

Det verkar som det i alla fall. Fan kan knappt bärga mig nu! Han får ju ta och vakna och fixa error:et så det släpps! :rolleyes:

[Andreas91Member January 1, 2009 at 10:44 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50134

@mothergoose 20723 wrote:

Jag vet faktiskt inte riktigt! Vore snällt om de kunde komma med tydliga instruktioner exakt kring hur man ska göra… Å andra sidan känner jag inte direkt att jag är i en position att ställa krav på dem med tanke på att de gör allt detta gratis och har lagt ner mycket tid på det…

“Update 3: Now to explain the above screenshot. The soft unlock has undergone many changes in the last two days. The most significant one: the soft unlock will now be only for baseband 02.28.00 (the most recent baseband). Yes we’ve been advising everyone to avoid updating their basebands, and in general that will always be the best policy. Not every baseband version is guaranteed to have a hole through which we can inject the unlock.

Update 4: (a) The yellowsn0w Cydia package will be available as soon as our devteam member in charge of the repo wakes up to fix a file permission error. (b) Once it’s out, those users with SIMs that have apps and other menus on them will need to do that extra step we’ve been talking about. They’ll need to pull and reinsert the SIM once after rebooting the phone to engage the unlock. Even though it’s needed only once per boot, it’s still a nuisance and we’ll be fixing that ASAP. (c) You’ll know if you fall into that “extra step” category if your carrier doesn’t show up within about 10 seconds of the slide to unlock screen. (d) Yes it really is for baseband 02.28.00. That means everyone can use it now! (e) Happy New Year!”

Det verkar som det i alla fall. Fan kan knappt bärga mig nu! Han får ju ta och vakna och fixa error:et så det släpps! :rolleyes:

[Andreas91Member January 1, 2009 at 10:28 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #52271

Vad jag har fattat det som, ska man uppdatera den med 2.2 via PwnageTool eller QuickPwn sen kommer YellowSn0w upp i Cydia under dagen. Stämmer detta?
Stämmer det även att man kan använda det senaste Basebandet 02.28.00. Har även fattat det som om mjukvaruupplåsningen kommer endast fungera på detta Basebandet. vill bara ha allt bekräftat så jag inte gör några misstag.

[Andreas91Member January 1, 2009 at 10:28 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #31028

Vad jag har fattat det som, ska man uppdatera den med 2.2 via PwnageTool eller QuickPwn sen kommer YellowSn0w upp i Cydia under dagen. Stämmer detta?
Stämmer det även att man kan använda det senaste Basebandet 02.28.00. Har även fattat det som om mjukvaruupplåsningen kommer endast fungera på detta Basebandet. vill bara ha allt bekräftat så jag inte gör några misstag.

[Andreas91Member January 1, 2009 at 10:28 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #46232

Vad jag har fattat det som, ska man uppdatera den med 2.2 via PwnageTool eller QuickPwn sen kommer YellowSn0w upp i Cydia under dagen. Stämmer detta?
Stämmer det även att man kan använda det senaste Basebandet 02.28.00. Har även fattat det som om mjukvaruupplåsningen kommer endast fungera på detta Basebandet. vill bara ha allt bekräftat så jag inte gör några misstag.

[Andreas91Member January 1, 2009 at 10:28 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #48547

Vad jag har fattat det som, ska man uppdatera den med 2.2 via PwnageTool eller QuickPwn sen kommer YellowSn0w upp i Cydia under dagen. Stämmer detta?
Stämmer det även att man kan använda det senaste Basebandet 02.28.00. Har även fattat det som om mjukvaruupplåsningen kommer endast fungera på detta Basebandet. vill bara ha allt bekräftat så jag inte gör några misstag.

[Andreas91Member January 1, 2009 at 10:28 Post count: 97]

in reply to: Upplåsning för iPhone 3G* på nyårsafton #50132

Vad jag har fattat det som, ska man uppdatera den med 2.2 via PwnageTool eller QuickPwn sen kommer YellowSn0w upp i Cydia under dagen. Stämmer detta?
Stämmer det även att man kan använda det senaste Basebandet 02.28.00. Har även fattat det som om mjukvaruupplåsningen kommer endast fungera på detta Basebandet. vill bara ha allt bekräftat så jag inte gör några misstag.

[Author]

Posts